Nortel 1110 User Guide
Removing an IP Phone 2004 from service
133
—End—
Replacing an IP Phone 2004
ATTENTION
Two IP Phones cannot share the same TN. You must remove the IP Phone 2004
that currently uses the TN.
that currently uses the TN.
Procedure 23
Replacing an IP Phone 2004
Step
Action
1
Obtain the node and TN information of the phone you want to
replace.
replace.
2
Disconnect the IP Phone 2004 that you want to replace.
3
Follow
and
or
to install
and configure the IP Phone 2004.
4
Enter the same TN and Node Number as the IP Phone 2004 you
replaced. The Call Server associates the new IP Phone 2004 with
the existing TN.
replaced. The Call Server associates the new IP Phone 2004 with
the existing TN.
—End—
Removing an IP Phone 2004 from service
Procedure 24
Removing an IP Phone 2004 from service
Step
Action
1
Disconnect the IP Phone 2004 from the network or turn the power off.
The service to the PC is disconnected as well if the PC connects to
the IP Phone 2004.
the IP Phone 2004.
If the IP Phone 2004 was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
expires and the IP address returns to the available pool.
2
In LD 11, enter OUT at the TN prompt.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003–2007, Nortel Networks
.