Nortel 1110 User Guide
168
Nortel IP Audio Conference Phone 2033
or
to install and configure the IP Audio Conference Phone 2033.
4
Enter the same TN and Node Number as the IP Audio Conference
Phone 2033 you replaced. The system associates the new IP Audio
Conference Phone 2033 with the existing TN.
Phone 2033 you replaced. The system associates the new IP Audio
Conference Phone 2033 with the existing TN.
—End—
Removing an IP Audio Conference Phone 2033 from service
Procedure 32
Removing an IP Audio Conference Phone 2033 from service
Step
Action
1
Disconnect the IP Audio Conference Phone 2033 from the network
or turn off the power.
or turn off the power.
If the IP Audio Conference Phone 2033 was automatically
configured, the DHCP lease expires and the IP address returns to
the available pool.
configured, the DHCP lease expires and the IP address returns to
the available pool.
2
In LD 11, enter OUT at the TN prompt.
—End—
Connecting an extension microphone
Procedure 33
Connecting an extension microphone to the IP Audio Conference Phone 2033
Step
Action
1
Thread the microphone cord through the channels on the bottom of
the IP Phone.
the IP Phone.
A maximum of two microphone jacks are supported on the IP Audio
Conference Phone 2033.
Conference Phone 2033.
2
Connect the microphone cord to one of the microphone jacks on the
bottom of the IP Phone.
bottom of the IP Phone.
—End—
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003–2007, Nortel Networks
.