Nortel 1110 User Guide
Installation and configuration
187
CAUTION
Damage to Equipment
Do not plug any device into your IP Phone 2007 Ethernet
port other than one PC. The IP Phone 2007 does not
support multiple devices connected through the PC
Ethernet port.
port other than one PC. The IP Phone 2007 does not
support multiple devices connected through the PC
Ethernet port.
Figure 20
IP Phone 2007 connections
IP Phone 2007 connections
6
Power the IP Phone 2007 using either the Power over Ethernet or
the Global power adapter (local power).
the Global power adapter (local power).
a. To use local power, plug the Global power adapter into the
nearest power outlet. See
.
b. Connect the power jack as shown in
The IP Phone 2007 supports both AC power and Power over
LAN options, including IEEE 802.3af Power Classification 2. To
use Power over Ethernet, where power is delivered over the
CAT5 cable, the LAN must support Power over Ethernet, and an
AC adapter is not required. To use local AC power, the optional
AC adapter can be ordered separately.
LAN options, including IEEE 802.3af Power Classification 2. To
use Power over Ethernet, where power is delivered over the
CAT5 cable, the LAN must support Power over Ethernet, and an
AC adapter is not required. To use local AC power, the optional
AC adapter can be ordered separately.
A tone sounds shortly before the IP Phone is ready to start the
Nortel IP Phone application.
Nortel IP Phone application.
7
Once the application has loaded and started, Nortel appears in
the middle of the screen. Immediately press the following keys in
sequence:
the middle of the screen. Immediately press the following keys in
sequence:
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003–2007, Nortel Networks
.