Nortel 1110 User Guide
360
Nortel IP Phone 1140E
Startup sequence
When an IP Phone 1140E connects to the network, it must perform a startup
sequence. The elements of the startup sequence include
sequence. The elements of the startup sequence include
•
obtaining VLAN ID (if supported by the network infrastructure)
•
obtaining the IP parameters
•
connecting to the Call Server
•
obtaining a User ID
See
for a summary
of the IP parameters and how they are obtained.
Table 49
IP Phone 1140E IP parameters
IP Phone 1140E IP parameters
Parameter
Method of acquisition
VLAN ID
Manually entered or automatically obtained through
DHCP, and LLDP.
DHCP, and LLDP.
IP Address
Manually entered or automatically obtained through Partial
or Full DHCP.
or Full DHCP.
Net Mask
Manually entered or automatically obtained through Partial
or Full DHCP.
or Full DHCP.
Default Gateway address
Manually entered or automatically obtained through Partial
or Full DHCP.
or Full DHCP.
Connect Server (IP address, port,
action and retry count—primary and
secondary)
action and retry count—primary and
secondary)
Manually entered or automatically obtained through Full
DHCP.
DHCP.
User ID (Node ID, Node Password
and TN)
and TN)
Manually entered for first-time configuration. Obtained
from local storage on subsequent power cycles.
from local storage on subsequent power cycles.
Installing the IP Phone 1140E
To install the IP Phone 1140E, use
.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003–2007, Nortel Networks
.