Nortel 1110 User Guide

544

Appendix I TFTP Server

the firmware from downloading or saving properly, the Expansion Module
reverts to the factory installed firmware. This version of firmware is always
available in case the downloaded firmware is unusable.

Downloading and configuring fonts

The font files are downloaded as needed using the same TFTP Server
configuration file method as IP Phone 2007, IP Phone 1120E, IP Phone
1140E, and IP Phone 1150E.

The IP Phone downloads the required files specified in the configuration
file, as necessary.

Table 77 "Fields in the TFTP configuration file for

downloadable fonts" (page 544)

describes the fields in the configuration

file on the TFTP Server for downloadable fonts. The section [FONTxx]
indicates the font file. Set the download mode to AUTO or FORCED. Nortel
recommends that you set DOWNLOAD_MODE to AUTO.

Table 77
Fields in the TFTP configuration file for downloadable fonts

Field Name

Field Value

Description

[FONTxx]

Section header for the font file, which contains
font information, including the optional download
parameters, versions, and how to use the
font after it is downloaded. Only [FONT01] to
[FONT10] are supported.

DOWNLOAD_MODE

AUTO

Recommended setting. The application looks
at the version and downloads the font if it is a
newer version than the one on the phone.

FORCED

The version of the font is ignored. The
configuration file is always downloaded.

PROTOCOL

TFTP

Download protocol. Must be TFTP.

SERVER_IP

xxx.xxx.xxx.xxx

IP Address of the TFTP server in decimal.

SECURITY_MODE

For future use.

FILENAME

Image file name. Must match the file name of
the actual IP Phone FW file.

ALIAS

Enables the font to have a different name in the
IP Phone file system than the one on the Call
Server.

VERSION

The version string compared to what is on the
phone.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368

01.02

Standard

Release 5.0

20 June 2007