Lowrance 5300c igps Operating Guide

57 

2. The Transfer My Data menu includes a message which tells you if an 

MMC is present or not. If no MMC is present, you must first insert a 

card into the unit in order to activate the Load or Save commands. 

To transfer data from the unit to the MMC: press 

 (for 

.) 

To transfer data from the MMC to the unit: press 

→ to 

|

. 

3.  Saving to MMC: To accept the default name "Data" for the GPS 
Data File, press 

↓ to 

|

. If you want to rename the file (as 

shown in the following figures), press 

 to activate the selection box. 

Press 

↑ or ↓ to change the first character, then press → to the next 

character and repeat until the name is correct. Then, press 

|

↓ to 

|

. 

The unit will display first a progress message followed by a completion 

message when the data transfer is finished. To return to the Page view, 

repeatedly press 

. 

 

 

  

4. Loading to unit memory: There may be more than one GPS Data 

File (*.USR) on the card. To select a file, press 

 to activate the se-

lection box, use 

↓ or ↑ to highlight the file, then press 

 to accept the 

selection. Next, press 

↓ to 

|

. The unit will display a com-

pletion message when the data transfer is finished. To return to the 

Page view, press 

 repeatedly.