Lowrance 7200c Operating Guide

Page of 168
134 
EP-15 Fluid Level Configuration 
To input Device Name: 
1. Press 
MENU| MENU
, use 
↑ ↓ to select 
NMEA
 
2000
 and press 
ENT
. The 
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.  
2. Highlight 
B
US 
S
ETUP
 and press 
ENT
, which will open the Bus Configu-
ration menu. A list of network devices will be at the top of the page.  
3. Select a fluid level you want to rename and press 
ENT
. The Device Con-
figuration menu will appear with the Device Name dialog box highlighted. 
4. Press 
ENT 
and use 
↑  ↓,  ←  →  to input the desired name for the fluid 
level. Press 
ENTER
. Press 
EXIT
 repeatedly to get back to the main display. 
To select Tank Instance (Location): 
1. Press 
MENU| MENU
, use 
↑ ↓  to select 
NMEA
 
2000
 and press 
ENT
. The 
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.  
2. Highlight 
B
US 
S
ETUP
 and press 
ENT
, which will open the Bus Configu-
ration menu. A list of network devices will be at the top of the page.  
3. Select the desired fluid level and press 
ENT
. The Device Configura-
tion menu will appear.  
4. Highlight 
T
ANK 
I
NSTANCE
 and press 
ENT
, which will open the Tank In-
stance menu with the following options: Tank 1, Tank 2, Tank 3 and 
Unknown. 
5.  Select the desired Tank Instance (location) and press 
ENT
. The fol-
lowing confirmation message will appear: Are you sure you wish to 
change this device's configuration?  
6. Highlight 
Y
ES
 and press 
ENT
. Press 
EXIT
 repeatedly to get back to the 
main display. 
To select Fluid Type: 
1. Press 
MENU| MENU
, use 
↑ ↓ to select 
NMEA
 
2000
 and press 
ENT
. The NMEA 
2000 menu will appear with five options: Bus Setup, Fuel Management, 
NMEA 2000 Alarms, Waypoint Sharing and Backlight Synchronization.  
2. Highlight 
B
US 
S
ETUP
 and press 
ENT
, which will open the Bus Configu-
ration menu. A list of network devices will be at the top of the page.  
3. Select the desired fluid level and press 
ENT
. The Fluid Level Device 
Configuration menu will appear. 
4. Press 
↓ to 
F
LUID 
T
YPE
 and press 
ENT
, which will open the Fluid Type 
menu with the following options: Fuel, Water, Gray Water, Live Well, 
Oil, Black Water and Unknown.