Lowrance lgc-3000 Installation Instruction

Pub. 988-0154-651

LGC-3000, LGC-Baja

GPS Modules

Installation Instructions

This instruction sheet tells how to install your LGC-3000 or LGC-Baja
GPS module and connect it to a NMEA 2000

network using

LowranceNET

™ network components.

The LGC-Baja is a ruggedized module designed to withstand the rigors of off-

road automobile racing. It works just like the LGC-3000, and for simplicity

we will only refer to the LGC-3000 in the rest of this instruction sheet.
The LGC-3000 GPS module, like the other Lowrance Electronic Probe

(EP) sensors, is designed only for use with a NMEA 2000 Network. It
MUST be connected to a NMEA 2000 network or it WILL NOT function.
CAUTION:

Installing LowranceNET NMEA 2000 devices is significantly
different from installing earlier Lowrance components without
NMEA 2000 features. You should read all of the installation in-
structions before proceeding. You should decide where to install
all components before drilling any holes in your vessel or vehicle.

Some sonar or GPS display units may require: 1. a software upgrade to

display NMEA 2000 data correctly; and 2. a manual addendum describ-

ing how to operate the sensor. You can download these free and get ad-
ditional information on the NMEA 2000

compatible LowranceNET

™

system at our web site, www.lowrance.com.

All Lowrance NMEA 2000 capable devices are either NMEA 2000 certi-

fied or certification is pending. See our web site for the latest product

status information.

LGC-3000 Module, bottom view (left) and top view (right).

™