Avocent DSR1010 User Manual
Chapter 2: Installation
7
Getting started
Before installing your DSR switch, refer to the following lists to ensure you have all items that
shipped with the DSR switch, as well as other items necessary for proper installation.
shipped with the DSR switch, as well as other items necessary for proper installation.
NOTE:
While it is possible to use two DSR switches in a cascaded configuration, it can cause function conflicts
and limit the advanced features of the switch. As a result, Avocent does not recommend this configuration.
Supplied with the DSR switch
•
Local country power cord
•
Rack mounting brackets (depending on switch model)
•
Rack Mounting Bracket Quick Installation Guide (depending on switch model)
•
DSR Switch Quick Installation Guide
•
Either of the following:
•
Two ribbon cables with RJ-45 connectors at each end
One RJ-45 to DB-9 (male) adaptor for the modem connection
One RJ-45 to DB-9 (female) adaptor for the SETUP, CONSOLE or 10101 port
-or-
•
One null modem cable
Table 2.1: Descriptions for Figure 2.1
Number
Description
Number
Description
1
Digital User
8
Power Cord
2
Telephone Network
9
Ports 1-32
3
Network
10
Local USB Connections
4
Modem
11
Power Control Device*
5
Analog User
12
Servers 1-32
6
External Virtual Media
13
IQ Modules PS/2, USB**, Sun and serial adaptors are
available.
available.
7
DSR8035 Switch
*If you are using a PM Intelligent Power Distribution Unit (IPDU), use the provided adapter.
**To open a virtual media session with a server, the server must first be connected to the switch using a
virtual media-capable IQ module (USB2 or USB2L).
**To open a virtual media session with a server, the server must first be connected to the switch using a
virtual media-capable IQ module (USB2 or USB2L).