IMC Networks iMcV-LIM 100Mbps 850-15637 Leaflet

Making Your Net  

Work

• Available for multi-mode or single-mode

fiber

• Double fiber capacity with single-strand

fiber versions

• ST, SC or SFP (LC) connector

• iMcV-Gigabit TX/SFP is compatible with

IMC Networks’ SFPs and all standard

MSA compliant SFP transceivers

• Monitor links and receive vital traffic and

health information and notification should

problems occur

• Modular, hot-swappable architecture reduces

operational costs associated with product

installation, upgrades and maintenance

• LinkLoss and FiberAlert features, plus SNMP

management and LEDs assist in diagnosing

problems on fiber optic networks

• Features Link Fault Pass-Through (LFPT),

a troubleshooting feature that monitors the

copper and fiber ports of the unit;

if a port loses LINK, the unit disables

the transmitting signal on the other port

(Pass-Through) and notifies the user via

LED (available on iMcV-LIM [100],

iMcV-Gigabit and IE-iMcV-Gigabit)

• Supports Config Control, a feature that

retains the latest configuration on a module

regardless of how the initial configuration

was setup; whether by DIP Switch or SNMP

Management Module (available on iMcV-LIM

[100] & iMcV-Gigabit)

• iMcV-PIM converts copper to fiber at

a data rate of 10 Mbps

• iMcV-LIM converts copper to fiber at

a data rate of 100 Mbps

• iMcV-LIM 10/100 converts 10 Mbps

copper to 10 Mbps fiber OR converts
100 Mbps copper to 100 Mbps fiber

• iMcV-Gigabit converts copper to fiber

at a data rate of 1Gbps

• IE-iMcV-Gigabit TX/SFP converts copper

to fiber (via SFP transceiver) at a data rate
of 1 Gbps

These iMcV series modules make the critical connection

between  twisted  pair  and  fiber  optics.    Most  are  also

available in a single-strand fiber version which allows two

wavelengths to share one fiber strand — Full-Duplex data

travels on different wavelengths (1310 nm and 1550 nm,

for  example)—  doubling  the  capacity  of  fiber.  Deploy

single-strand  fiber  products  in  pairs,  or  connect  two

compatible IMC Networks single-strand fiber products.

Satisfying today’s networking needs while preparing for tomorrow’s

requirements  in  cabling  bandwidth,  distance  and  security  can

make  designing  and  installing  the  physical  layer  of  networks  a

daunting  task.    The  decreasing  cost  of  fiber  optic  cabling  and

switching  equipment  makes  all-optical  LANs  the  obvious  choice

when future-proofing a network. Replacing legacy equipment and

the wiring infrastructure is a costly choice that could produce too

much network downtime. Managed media conversion allows the

implementation of new technologies on an existing network and

the monitoring of all connections to keep networks up-to-date and

running in peak condition.

Easily configure and manage converters with the GUI-based iView².

As  an  SNMP  management  application,  iView²  gives  network

managers  the  ability  to  monitor  and  control  IMC  Networks'

products.    iView²  runs  standalone  on  Windows  NT/XP/2000,  as

a  standalone  Java  Application  for  other  operating  systems,  as  a

snap-in module for HP OpenView, as a Web Server running under

IIS  or  as  a  Java  Web  Servlet.  For  assistance  in  selecting  the  right

version of iView² for your operating system, visit our web site at:

http://www.imcnetworks.com/Products/iView2.cfm

RoHS

Compliant