PROSCAN psvr71 User Guide
11
Setting Up the VCR
AUTO CHANNEL SEARCH
What type of signal
are you using?
are you using?
1 Cable TV
2 Antenna
2 Antenna
3 Detect Automatically
0 Cancel
4. Select one of the three AUTO CHANNEL SEARCH options.
•
Cable TV searches for cable stations from a single channel
•
Antenna searches for local broadcast stations on all channels
•
Detect Automatically will make this decision for you
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels—this takes
about one to two minutes. When the scan is complete, the VCR
tunes to the lowest channel number available. At this point,
pressing CHAN + or - on the remote should only select active
channels.
about one to two minutes. When the scan is complete, the VCR
tunes to the lowest channel number available. At this point,
pressing CHAN + or - on the remote should only select active
channels.
Changing the Signal Type
This feature is useful if your cable signal goes out; it allows you to
switch to a regular antenna for alternate television reception.
switch to a regular antenna for alternate television reception.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the Signal Type between Cable and Antenna.
When you are finished, press 0 to exit back to the Main Menu
and 0 again to exit to normal viewing.
and 0 again to exit to normal viewing.
Detect Automatically
A strong cable or antenna signal in
your area may cause
Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you have.