PROSCAN psvr71 User Guide

35

Recording

PLAYBACK VCR

CABLE BOX

OR     ANTENNA

RECORDING VCR

OR

OR

TO  TV

TO  TV

     
  3 CH. 4

IN FROM
ANT.

VIDEO

OUT  

R-AUDIO-L

OUT TO TV

VHF/UHF

MONO

IN 1

     
  3 CH. 4

IN FROM
ANT.

VIDEO

OUT  

R-AUDIO-L

OUT TO TV

VHF/UHF

MONO

IN 1

I

OU

2. Press the SPEED button on the remote if you want to override the

preferred Tape Speed setting.

3. Start audio source playing and press RECORD to begin recording.

4. Press STOP when you are finished.

Playing Back Audio Only

To get stereo sound, connect the AUDIO OUT jacks of the VCR to the
appropriate input on your amplifier or receiver. Do not use the phono
input. Refer to your amplifier or receiver user’s guide.

Using Two VCRs for Copying and
Editing Tapes

Use one VCR as the 

playback VCR and the other as the

recording VCR.

1. Turn on the TV and VCRs.

2. Tune the TV to the VCR viewing channel (either 3, 4, or TV’s video

input).

3. If you connected your VCR using the IN FROM ANT. and OUT TO

TV jacks, tune 

recording VCR to channel 3 or 4—the one selected

on the back of the 

playback VCR.

If you have connected your VCR using the audio/video jacks

, press

INPUT on the 

recording VCR’s remote to select the line input.

Select L1 for the jacks on the back of the VCR or L2 for the jacks
on the front.

4. Insert the tape you want to copy into the 

playback VCR. Insert a

blank tape with safety tab in place into the 

recording VCR.

5. Press PLAY on the 

playback VCR to begin playback. When you

reach the point on the tape or program where you want to begin
copying, press PAUSE. You may need to adjust the tracking.

6. Press the RECORD button, then press PAUSE, on the

recording VCR.

7. Press the PAUSE buttons on 

both VCRs at the same time to begin

copying the tape.