Aiwa TS-W150 Operating Guide
4
En
Connection
There are two ways (A and B) to connect TS-W150
to equipment (stereo system, receiver or etc).
If the epuipment has an output jack for subwoofer,
use AConnection.
If not, use BConnection..
to equipment (stereo system, receiver or etc).
If the epuipment has an output jack for subwoofer,
use AConnection.
If not, use BConnection..
Note
Do not connect TS-W150 to equipment in both A and B
ways simultaneously.
ways simultaneously.
PREPARATIONS
Positioning
Because low-frequency sound reproduced by the powered
subwoofer is mostly non-directional, the listener will be unable
to localize the bass source. Accordingly, the powered
subwoofer provides maximum flexibility in terms of
positioning. For the most effective low-frequency sound, the
powered subwoofer should be placed on the floor close to a
wall or in a corner of the room.
subwoofer is mostly non-directional, the listener will be unable
to localize the bass source. Accordingly, the powered
subwoofer provides maximum flexibility in terms of
positioning. For the most effective low-frequency sound, the
powered subwoofer should be placed on the floor close to a
wall or in a corner of the room.
(Position example)
A
A
A
A
A
Connection
Note
Do not plug in the AC power cords of both TS-W150 and the
epuipment to the AC power outlets before all other connections
are made.
epuipment to the AC power outlets before all other connections
are made.
1
Connect the SUB WOOFER or SUPER WOOFER
jack on Ethe equipment to the INPUT 1 (FROM
SUBWOOFER TERMINAL) jack on STS-W150
with C the supplied connecting cord.
jack on Ethe equipment to the INPUT 1 (FROM
SUBWOOFER TERMINAL) jack on STS-W150
with C the supplied connecting cord.
2 Set the INPUT SELECT switch to “1”.
3 Connect the AC power cord to an AC outlet.