Aiwa hv-dh10 User Guide

Page of 58
PREP
ARA
TION
15
Additional Connections (Continued)
AER IAL
VIDEO IN+OUT/DVD OUT
EURO AV2
DECODER
EURO AV1
AUDIO/VIDEO
RF OUT
AUDIO
AUDIO
DVD/VIDEO
OUT
DVD/VIDEO
OUT
COAXIAL
DVD EXCLUSIVE
OUT
Coaxial cord (not supplied)
to the digital input jack
Connecting to an AV Receiver
Equipped with a Digital Decoder
Connect the COAXIAL audio output jack on this unit
to the corresponding in jack on your AV receiver.
Set the setup menu correctly after connecting
Some AV receivers have digital decoders that use the
bitstream signal directly from Dolby Digital or DTS
inputs. If your AV receiver has a digital decoder for
Dolby Digital or DTS inputs, set the output signal from
your unit to DOLBY DIGITAL/PCM or Stream/PCM for
that input. Otherwise, set the output to PCM (see
“Initial Settings” on page 28 for details).
DO NOT select DOLBY DIGITAL/PCM or Stream/
PCM for the Digital Audio Output setting in the
setup menu when connecting to an AV receiver
not equipped with a Dolby Digital or DTS decoder
(with a coaxial connecting cord).
Merely attempting to play a disc may cause a
screeching noise that could be harmful to your
ears and damage the speakers. Be sure to select
PCM for the Digital Audio Output setting.
• Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
unpublished works. ©1992-1999 Dolby Laboratories. All
rights reserved.
• “DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
If your AV receiver is equipped with a Dolby Digital or DTS decoder, you can enjoy high-quality audio playback.
 PM/HV-DH1(EH)/Eng/07-17
4/16/03, 5:01 PM
15