Aiwa hv-dh10 User Guide
34
Operation with Tape (Continued)
To pause while recording
Press aPAUSE/FRAMEF to avoid recording
unwanted scenes.
Press aPAUSE/FRAMEF to continue recording.
Press aPAUSE/FRAMEF to avoid recording
unwanted scenes.
Press aPAUSE/FRAMEF to continue recording.
• Tapes can be paused for up to 5 minutes; RECP will be
displayed when a tape is paused. After 5 minutes the unit
will stop recording to prevent damaging the tape or the
unit.
will stop recording to prevent damaging the tape or the
unit.
To stop recording
Press sSTOP.
Press sSTOP.
Notes
• If you do not wish to record on a tape (this can happen
quite easily by accident!) remove the protection tab on the
back edge of the video cassette.
back edge of the video cassette.
• It is possible to record on a video cassette with the record
protection tab removed by covering the hole with adhesive
tape.
tape.
• Remember you can record one program while watching
another by starting your one-touch recording, press TV/
VIDEO to select TV mode and then selecting a different
channel on your TV.
VIDEO to select TV mode and then selecting a different
channel on your TV.
ShowView Programming
ShowView greatly simplifies entering the date,
channel, start and end times of a Timer Recording by
simply entering a ShowView Code. ShowView Codes
are published in most TV guide magazines; they can
vary one to nine numbers in length.
channel, start and end times of a Timer Recording by
simply entering a ShowView Code. ShowView Codes
are published in most TV guide magazines; they can
vary one to nine numbers in length.
1
Press VIDEO to switch out to the VCR.
2
Make sure that TV channels have been tuned
and stored in correct ShowView order.
Insert a video cassette with protection tab into
the unit.
and stored in correct ShowView order.
Insert a video cassette with protection tab into
the unit.
3
Press SHOWVIEW.
ONCE
OK
i
0~9,
SHOWVIEW
- - - - - - - -
-
REC
4
Press i+/k– to select the recording type.
ONCE: To record once.
DAILY: To record every day (except Saturday and
Sunday) at the same time.
WEEKLY: To record at the same time every
week.
ONCE: To record once.
DAILY: To record every day (except Saturday and
Sunday) at the same time.
WEEKLY: To record at the same time every
week.
5
Press the numeric buttons to enter the ShowView
Code of the TV program that you wish to record.
Code of the TV program that you wish to record.
• If you make a mistake press j then enter the
revised number.
ONCE
OK
i
0~9,
SHOWVIEW
24687654
3
REC
6
Press OK/ENTER.
If PLEASE CHECK is displayed it means that you
have entered the wrong ShowView number,
entered the ShowView number incorrectly.
If “- -” is displayed, you have to enter the program
number of the station, you want to record from.
If PLEASE CHECK is displayed it means that you
have entered the wrong ShowView number,
entered the ShowView number incorrectly.
If “- -” is displayed, you have to enter the program
number of the station, you want to record from.
PR
DATE
TIME
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
10
ARD
12
SP
11 11 55
~
:
:
i
7
Press j/l to select the settings that you wish to
revise (PR: preset the channel position or TV
station’s name, DATE, TIME, VPS/PDC and tape
speed: SP, LP or IP).
Press i+/k– to enter the correct information.
revise (PR: preset the channel position or TV
station’s name, DATE, TIME, VPS/PDC and tape
speed: SP, LP or IP).
Press i+/k– to enter the correct information.
PR
DATE
TIME
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
10
ARD
12
SP
11 11
55
~
:
:
i
PM/HV-DH1(EH)/Eng/32-42
4/16/03, 5:03 PM
34