Aiwa hv-dh10 User Guide

This unit allows you to copy the contents of a DVD to
a video cassette tape.

If the DVD you are attempting to copy is copy protected, you
will not be able to copy the disc. It is not permitted to copy
Macrovision encoded DVDs. “LOCK” is displayed in the
display window.

Insert the disc you wish to copy in the DVD deck
and close the disc tray.

Insert a blank video cassette into the VCR deck.

Press DVD on the remote control and then press
C.
The DVD will go into play mode.

• If the DVD disc menu appears, you may need to

press C manually to begin copying.

Press wREC on the unit.
The unit will go into Record mode.

To stop copying
When the DVD is finished playing, press sSTOP to
end the copy.
You must stop the Copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.

With this unit you can make recordings from an
external source, such as copying from another video
recorder or a camcorder.

In the following description, this unit will be one used for
recording and will be referred to as this unit. The other
appliance will be used for playback and will be referred to as
VCR A.

VCR A should be connected to the EURO AV2
DECODER jack on the rear panel of this unit or
the AV 3 IN jacks on the front panel of this unit.

Insert the recorded video cassette tape into the
VCR A and a blank video cassette into this unit.

To start recording, press wREC on this unit and
PLAY on VCR A.

When you want to finish copying, press sSTOP
on both video recorders.

 PM/HV-DH1(EH)/Eng/32-42

4/16/03, 5:03 PM

38