Extreme x250e-24t Installation Instruction
Summit Family Switches Hardware Installation Guide
113
Figure 83: Attaching Terminals to Cables
Installing the Power Supply
CAUTION
The handle on the Summit X650 DC PSU is not designed to be used to lift or carry the Summit X650 series switch.
To install a Summit X650 DC PSU:
1
Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an appropriate
ground point on the rack.
ground point on the rack.
2
If necessary, remove a blank panel from the back of the Summit X650 series switch (
).
Figure 84: Removing a Blank Panel
3
Verify that the PSU is right side up (see
).
4
Carefully slide the PSU all the way into the power supply bay (see
). Push the PSU in until
the latch snaps into place.
CAUTION
Do not slam the PSU into the switch.
SH_109
SH_110
Power connection wire
Gro
u
nd wire
SH_106