Extreme x250e-24t Installation Instruction

Summit Family Switches Hardware Installation Guide

Remove the rack-mounting screws and detach the rear mounting brackets from the rack post 
(

Removing the Summit X650 switch from a cabinet or rack requires two people to maneuver the switch 
and disconnect the mounting hardware.

To remove the Summit X650 series switch from a cabinet or four-post rack:

Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate 
ground point on the rack.

Disconnect all power cords from the back of the switch.

Remove all installed power supplies:

Push the latching tab to the left as you pull the handle to disengage the power supply from its 
internal connectors.

Carefully slide the power supply out of the switch and set it aside.

Support the front of the switch while you remove the front rack mounting screws (

Carefully slide the switch forward out of the cabinet and off the rear mounting brackets.

S

H_097