Extreme x250e-24t Installation Instruction
Summit Family Switches Hardware Installation Guide
25
Summit X250e-24tDC Switch
The front panel of the Summit X250e-24tDC switch (
) includes:
●
Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
high-density copper connectivity
high-density copper connectivity
●
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
●
LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see
●
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
Figure 9: Summit X250e-24tDC Switch Front Panel
The rear panel of the Summit X250e-24tDC switch (
) includes:
●
Ethernet management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-150DC External Power Module
(Model No. 10909).
(Model No. 10909).
See
for more information. The
connecting redundant power supply cable is shipped with the EPS-150DC unit.
●
DC power input socket
The power supply operates from -36 VDC to -72 VDC.
●
Grounding lug
NOTE
For centralized DC power connection, this product is intended to be installed in a restricted access location (such as
a dedicated equipment room, equipment closet, or central office) in accordance with Articles 110-16, 110-17, and
110-18 of the National Electric Code, ANSI/NFPA 70.
a dedicated equipment room, equipment closet, or central office) in accordance with Articles 110-16, 110-17, and
110-18 of the National Electric Code, ANSI/NFPA 70.
1
2
Stack
SH_057_front_x250e-24tdc
10/100 Mbps ports
Console
port
Combination ports
Stack number indicator
DC