Extreme x250e-24t Installation Instruction

Summit Family Switches Hardware Installation Guide

The front panel of the Summit X250e-48p switch (

) includes:

●

Forty-eight fixed autosensing 10/100BASE-T PoE ports (ports 1–48). In addition to 4.8 Gbps of 
high-density copper connectivity, these ports provide a full 15.4 Watts of PoE per port when used 
with the EPS-600LS External Power Module.

●

Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper 
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.

●

LEDs to indicate port status and switch operating conditions. 
For a description of the LEDs and their operation, see 

●

Stack number indicator showing the position of this switch in a stacked configuration.

●

Serial console port used to connect a terminal and perform local management.

The rear panel of the Summit X250e-48p switch (

) includes:

●

Management port with associated LEDs

●

Two high-performance stacking ports with associated LEDs

●

Redundant power input connector for use with one or more EPS-600LS External Power Modules 
(Model No. 10913) installed in an EPS-C chassis (Model No. 10912). 
The PoE capability of the Summit X250e-48p switch varies depending on the number of external 
power modules in use. For more information, see 

. 

The connecting redundant power supply cable is shipped with the EPS-C chassis.

●

AC power input socket. 
The internal AC power supply operates from 100 VAC to 240 VAC. 

SH_042B

10/100 Mbps ports

Console

port

Combination ports

Stack number indicator

10 Gigabit

stacking ports

Management port

Power socket

External power

supply connection