Extreme x250e-24t Installation Instruction
Summit Family Switches Hardware Installation Guide
67
●
Summit X450-24t switch
●
Summit X450-24x switch
The EPS-T is a rack-mountable chassis or tray that holds one or two EPS-160 power supplies. Each EPS-
160 power supply provides one-to-one redundancy for an attached Extreme Networks switch.
160 power supply provides one-to-one redundancy for an attached Extreme Networks switch.
You can order the EPS-T chassis with one or two EPS-160 power supplies already installed. You can also
order an additional power supply from your Extreme Networks reseller.
order an additional power supply from your Extreme Networks reseller.
NOTE
Each EPS-160 power supply is shipped with a special redundant power supply cord (
. An AC power input
cord is not provided; you can order an appropriate cord from Extreme Networks or from your local supplier. The
power cord must meet the requirements listed in
power cord must meet the requirements listed in
Figure 54: Redundant Power Cord Connector
EPS-LD External Power Supply Unit
You can use the Extreme Networks EPS-LD External Power Supply Unit (Model 45019) as a redundant
power supply with the following Extreme Networks switches:
power supply with the following Extreme Networks switches:
●
Summit X450a-24t switch
●
Summit X450e-24p switch
When attached to the Summit X450e-24p, the EPS-LD provides 465 W total power with 375 W dedicated
for PoE applications.
for PoE applications.
ES4K027