Extreme 3802 Hardware Manual
106
Extreme Networks Consolidated Hardware Guide
Summit Switch Installation
CAUTION
Do not use the rack mount kits to suspend the switch under a table or desk, or to attach the switch to a
wall.
wall.
To mount the Summit switch in a standard 19-inch (48.26 cm) rack:
1
If you are installing a Summit7i switch, mount the helper bracket in the rack, as shown in Figure 46.
Use four screws (not provided) that are appropriate to your rack type.
Use four screws (not provided) that are appropriate to your rack type.
NOTE
The Summit7i switch can weigh up to 55 pounds (24.9 kg).
NOTE
Only the Summit7i switch uses the helper bracket. The helper bracket is not required to rack mount
a Summit1i, Summit5i, Summit48i, Summit48si, Summit4, Summit4/FX, Summit24e2, Summit24e3,
or SummitPx1 switch.
a Summit1i, Summit5i, Summit48i, Summit48si, Summit4, Summit4/FX, Summit24e2, Summit24e3,
or SummitPx1 switch.
Figure 46: Helper bracket for the Summit7i switch
2
Place the switch upright on a secure flat surface with the front of the switch facing you.
3
Remove the switch from the box, and remove the packing material from the switch.
4
Remove the existing screws from the sides of the case (retain the screws for Step 6).
5
Place a mounting bracket over the mounting holes on one side of the unit.
BDbrackt