Extreme 3802 Hardware Manual
Alpine 3800 Series Architecture
Extreme Networks Consolidated Hardware Guide
129
NOTE
Slot 3 in the Alpine 3802 accepts only Alpine Access I/O modules (silver stripe). You cannot insert an
Alpine Ethernet I/O module (green stripe) into slot 3.
Alpine Ethernet I/O module (green stripe) into slot 3.
For more information about this command, see the ExtremeWare Command Reference Guide and the
ExtremeWare Software User Guide.
ExtremeWare Software User Guide.
Alpine 3802 Switch LEDs
Table 36 describes the LED activity of the Alpine 3802 switch.
NOTE
The Alpine 3802 switch has an integrated Switch Management Module that is located in the
chassis.The module is not hot-swappable or user-removable. Do not attempt to remove. Contact
Extreme Networks Customer Support if you experience problems.
chassis.The module is not hot-swappable or user-removable. Do not attempt to remove. Contact
Extreme Networks Customer Support if you experience problems.
Table 36: Alpine 3802 switch LEDs
LED
Color
Indicates
DIAG
Green blinking
Off
Power-on Self Test (POST) is running
Normal operation
STATUS
Green blinking
Yellow blinking
Off
Normal operation
Critical error, fan failure, or over temperature
Unit is not receiving power
PSU A, PSU B
Green
Amber
Off
Normal operation
PSU failure
PSU not present or not powered
EXTENDED MODE
STANDARD MODE
Green
Off
Green
Off
Extended mode operation
Not operating in extended mode
Standard mode operation
Not operating in standard mode