Extreme 3802 Hardware Manual
288
Extreme Networks Consolidated Hardware Guide
BlackDiamond 6800 Series Switch Fan Tray
Figure 144: An example of removing the BlackDiamond 6808 fan tray
4
Allow the fan blades to stop spinning before removing the fan tray completely.
WARNING!
Keep your hands your away from rotating fan blades.
5
Repeat this procedure for additional fan trays, if applicable.
6
Leave the ESD strap permanently connected to the chassis so that it is always available when you
need to handle ESD-sensitive components.
need to handle ESD-sensitive components.
Installing a BlackDiamond 6800 Series Fan Tray
BlackDiamond 6800 series fan trays are hot-swappable. You do not need to turn off power to a
BlackDiamond 6800 series switch to install a fan tray.
BlackDiamond 6800 series switch to install a fan tray.
You need the following tools and equipment to install a fan tray:
•
ESD-preventive wrist strap
•
# 1 Phillips screwdriver
•
Replacement fan tray
CAUTION
Only trained service personnel should perform service to BlackDiamond fan trays. Before installing or
removing any components, or carrying out any maintenance procedures, see Appendix A.
removing any components, or carrying out any maintenance procedures, see Appendix A.
BD_fanx