Extreme 3802 Installation Guide
152
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Alpine 3800 Series Chassis Installation
aware of the hazards to which they are exposed in performing a task. They are aware of measures to
minimize the danger to themselves or other persons.
minimize the danger to themselves or other persons.
NOTE
Electronic components are sensitive to static electricity. ESD originating from you or from objects
around you can damage these components. Exercise every possible precaution to prevent ESD
when working around printed circuit assemblies.
around you can damage these components. Exercise every possible precaution to prevent ESD
when working around printed circuit assemblies.
Keep all printed circuit assemblies in protective ESD-preventive packaging or place them on
antistatic mats until you are ready to install them. Wear an ESD-preventive wrist strap and ensure
that the leash is securely grounded before handling a bare printed circuit assembly.
antistatic mats until you are ready to install them. Wear an ESD-preventive wrist strap and ensure
that the leash is securely grounded before handling a bare printed circuit assembly.
•
Some devices, such as I/O modules, contain fiber optic ports. To protect your eyes, you should
never look at the fiber optic ports while they are on, or look directly at the fiber cable ends when
they are on.
never look at the fiber optic ports while they are on, or look directly at the fiber cable ends when
they are on.
Installing the Chassis in a Rack
The Alpine 3800 series chassis fits in a standard 19-inch (48.26 cm) rack. Table 29 shows the height
measurements for the Alpine 3800 series chassis.
measurements for the Alpine 3800 series chassis.
The Alpine 3808 and Alpine 3804 chassis are shipped with preinstalled fan trays. The Alpine 3802
chassis is shipped with a preinstalled power supply and fan tray. For your safety and to prevent
damage to the equipment, Extreme Networks strongly recommends that you mount the chassis in the
rack as shipped, before you install modules and power supplies. The increased weight of the chassis
after components are installed can make the switch hard to maneuver.
chassis is shipped with a preinstalled power supply and fan tray. For your safety and to prevent
damage to the equipment, Extreme Networks strongly recommends that you mount the chassis in the
rack as shipped, before you install modules and power supplies. The increased weight of the chassis
after components are installed can make the switch hard to maneuver.
NOTE
Mount the chassis in a rack before installing any switch components.
To mount the Alpine 3800 series chassis in a standard 19-inch (48.26 cm) rack, you need the following
tools, equipment, and resources:
tools, equipment, and resources:
•
Helper bracket (provided)
•
A minimum of four appropriate screws (not provided) to secure the helper bracket
•
For an Alpine 3808 or 3804, a minimum of eight appropriate screws (not provided) to secure the
chassis to the rack
chassis to the rack
•
For an Alpine 3802, a minimum of four appropriate screws (not provided) to secure the chassis to
the rack
the rack
Table 29: Alpine 3800 chassis height measurements
Switch Model
Height
Alpine 3808
12 U
Alpine 3804
6 U
Alpine 3802
4 U