Extreme 3802 Installation Guide

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide

67

Figure 21 shows the front of the Summit 300-24 switch.

Figure 21: Summit 300-24 switch front view

The front panel of the Summit 300-24 switch includes LEDs, a console port, fixed 10/100 Mbps ports, 
and high-speed uplink ports implemented as either a 10/100/1000 Mbps copper port or an installed 
1000-BASEx mini-GBIC.

Figure 22 shows the rear of the Summit 300-24 switch.

Figure 22: Summit 300-24 switch rear view

The rear panel of the Summit 300-24 switch provides air circulation vents, an AC power socket, a 
system label, and a redundant power connector. The AC power connector provides power to the switch 
when a power cable is connected. The system label provides the manufacturing serial number the 
unique Ethernet MAC address that is assigned to this device. Use the serial number for fault reporting. 

The redundant power connector allows you to connect a redundant power supply to provide redundant 
support for the Power over Ethernet (PoE) functions of the switch. For more information about the 
redundant power supply, see “Redundant Power Supply” on page 70. For connector pinouts, see 
“Pinouts for Summit 300-24 switch redundant power connector” on page 337

The LED activity on the Summit 300-24 is described in Table 12.

RVN24001A

10/100 Mbps ports

Console

port

Mini-GBIC

port status LEDs

Management

LED

PSU LEDs

Fan LED

Mini-GBIC/
1000-baseX ports

10/100/1000-baseT ports

Slot for key

RVN24002

Power socket

Redundant

power cable