Extreme 3802 Installation Guide
Meeting Site Requirements
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
39
Figure 7: Using an ESD wrist strap when handling switch components
Rack Specifications and Recommendations
Racks should conform to conventional standards. In the United States, use EIA Standard RS-310C:
Racks, Panels, and Associated Equipment. In countries other than the United States, use IEC Standard
297. In addition, verify that your rack meets the basic mechanical and space requirements that are
described in this section.
Racks, Panels, and Associated Equipment. In countries other than the United States, use IEC Standard
297. In addition, verify that your rack meets the basic mechanical and space requirements that are
described in this section.
Mechanical Recommendations for the Rack
Use distribution racks that meet the following mechanical recommendations:
•
Use an open style, 19-inch (48.26 cm) rack to facilitate easy maintenance and to provide proper
ventilation.
ventilation.
•
The rack should use the universal mounting rail hole pattern that is identified in IEC Standard 297.
•
The mounting holes should be flush with the rails to accommodate the chassis.
•
Use a rack made of steel or aluminum.
SPG_003
AC IN
DC OUT
50020
POWER
AC IN
DC OUT
50020
POWER
ESD strap
connector
Connected
wrist strap
50015
1
2
3
4
A
B
5
6
7
8
50015