Extreme 3802 Hardware Manual
Removing the Switch from a Rack
Extreme Networks Consolidated Hardware Guide
115
•
A minimum of four appropriate screws to secure the helper bracket (not provided)
•
# 1 Phillips screwdriver
•
If you have a Summit7i switch, a minimum of two people to help remove the switch from the rack
To remove the Summit switch from a standard 19-inch (48.26 cm) rack:
1
Unplug the power cable(s) from the from the wall outlet(s) and then from the switch. For the
Summit4, Summit 24, and Summit48 switches, turn the on/off switch to the off position.
Summit4, Summit 24, and Summit48 switches, turn the on/off switch to the off position.
2
Disconnect the Summit switch from the redundant power supply (if applicable).
3
If you are removing a Summit7i switch, mount the helper bracket in the rack directly beneath the
switch using four screws that are appropriate for your rack.
switch using four screws that are appropriate for your rack.
4
Unscrew the chassis from the rack.
5
Have a minimum of two people gently remove the chassis from the rack and place it on a secure, flat
surface with the front of the chassis facing you.
surface with the front of the chassis facing you.
6
Unscrew the helper bracket and remove it from the rack.