Extreme 3802 Hardware Manual
156
Extreme Networks Consolidated Hardware Guide
Alpine 3800 Series Switch Management Module
•
Management port—Used to connect an Ethernet cable directly from your laptop into the
management port to view and locally manage the switch configurations.
management port to view and locally manage the switch configurations.
•
Modem port —Used to connect a modem for remote access to the CLI.
•
PCMCIA slot—Reserved for future use.
See “Management Ports” in Chapter 1 for more information about management ports, and for more
information about Alpine SMMi module specifications, see Appendix C, “Module Technical
Specifications.”
information about Alpine SMMi module specifications, see Appendix C, “Module Technical
Specifications.”
SMMi Memory
The SMMi has two 144-pin SODIMM sockets, and ships with two 128 MB SODRAM modules installed,
as shown in Figure 71.
as shown in Figure 71.
NOTE
The SMMi supports only the SODIMMs that are supplied by Extreme Networks.
Figure 71: SMMi SODIMM sockets
NOTE
See “Adding SODIMMs to the SMMi Module” on page 158 and “Removing SODIMMs from the SMMi
Module” on page 159 for more details on how to add and remove SODIMMs.
Module” on page 159 for more details on how to add and remove SODIMMs.
SMMi LEDs
Table 42 describes the LED activity on the SMMi.
Table 42: SMMi LEDs
LED
Color
Indicates
DIAG
Green blinking
Off
Power-on Self Test (POST) is running
Normal operation
STATUS
Green blinking
Yellow blinking
Off
Normal operation
Critical error, fan failure or over temperature
Unit powered down
PSU A
PSU B
Green
Amber
Off
PSU is OK
DC output failure
PSU not present or not powered
38_SODMs