Extreme 3802 Hardware Manual

Extreme Networks Consolidated Hardware Guide

289

Connect a terminal or PC with terminal-emulation software to:

The console port for Summit switches

The SMMi for the Alpine 3808 and Alpine 3804 switches

The console port for the Alpine 3802 switch

The MSM64i for BlackDiamond switches

At your terminal, press [Return] one or more times until you see the login prompt.

At the login prompt, enter the default user name admin to log on with administrator privileges. For 
example:

login: 

 

Administrator capabilities allow you to access all switch functions.

For more information about logging in to the switch and configuring switch management access, see 
the ExtremeWare Software User Guide.

At the password prompt, press [Return].

This is because the default user name, admin, has no password assigned to it. When you have 
successfully logged on to the system, the command-line prompt displays the system name (for 
example, 

BlackDiamond6800>

 in its prompt.

For more information about how to make a specific system name, see the ExtremeWare Software 
User Guide.

Assign an IP address and subnetwork mask for VLAN default by typing:

Your changes take effect immediately. 

Save your configuration changes so that they will be in effect after the next system reboot, by typing: 

The configuration is saved to the configuration database of the SMMi modules in the Alpine switch 
and both MSM64i modules in the BlackDiamond switch.

For more information about saving configuration changes, see the ExtremeWare Software User 
Guide.

When you are finished with these tasks, log out of the switch by typing: