Extreme 3802 Hardware Manual
38
Extreme Networks Consolidated Hardware Guide
Summary of Common Switch Features
NOTE
Remove the SC fiber-optic or the RJ-45 connector from the GBIC prior to removing the GBIC from the
I/O module or the switch.
I/O module or the switch.
CAUTION
GBICs can emit invisible laser radiation. Avoid direct eye exposure to beam.
To remove the GBIC connector labeled “Module A,” lift up on the front handle and pull the GBIC out of
the slot.
the slot.
To remove the GBIC connector labeled “Module B” or “Module C,” gently squeeze the sides to release
it, and pull the GBIC out of the slot.
it, and pull the GBIC out of the slot.
To insert a GBIC connector:
1
Holding the GBIC by its sides, insert the GBIC into the slot on the I/O module or the switch.
2
Slide the GBIC into the slot, until you hear it click.
3
If the GBIC has a handle, push down on the handle to secure the GBIC.