Extreme 3802 Hardware Manual
Evaluating and Meeting Cable Requirements
Extreme Networks Consolidated Hardware Guide
53
Figure 11: Properly secured rack
Brace open distribution racks if the channel thickness is less than 1/4 inch (6.4 mm).
Evaluating and Meeting Cable Requirements
This section addresses requirements for the that cable you should use when installing your network
equipment. It includes:
equipment. It includes:
•
•
•
•
•
Cabling Standards
We recommend using the BICSI (Building Industry Consulting Service International) RCDD (Registered
Communications Distribution Designer), which is globally recognized as a standard in site planning and
cabling. For information, go to http://www.bicsi.org
Communications Distribution Designer), which is globally recognized as a standard in site planning and
cabling. For information, go to http://www.bicsi.org
SPG_007
Secure to floor
with 3/8 inch lag screws or bolts