Extreme 3802 Installation Guide
Removing the Switch from a Rack
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
115
Removing the Switch from a Rack
To remove the Summit switch from a rack, you need the following tools, equipment, and resources:
•
Helper bracket (provided with the Summit7i switch)
•
A minimum of four appropriate screws to secure the helper bracket (not provided)
•
# 1 Phillips screwdriver
•
If you have a Summit7i switch, a minimum of two people to help remove the switch from the rack
To remove the Summit switch from a standard 19-inch (48.26 cm) rack:
1
For AC-powered switches, unplug the power cable(s) from the from the wall outlet(s) and then from
the switch.
the switch.
For a DC-powered Summit48si, disconnect the keyed DC cable connector from each installed power
supply.
supply.
2
Disconnect the Summit switch from the redundant power supply (if applicable).
3
If you are removing a Summit7i switch, mount the helper bracket in the rack directly beneath the
switch using four screws that are appropriate for your rack.
switch using four screws that are appropriate for your rack.
4
Unscrew the chassis from the rack.
5
Have a minimum of two people carefully remove the chassis from the rack and place it on a secure,
flat surface with the front of the chassis facing you.
flat surface with the front of the chassis facing you.
6
Unscrew the helper bracket and remove it from the rack.