Extreme 3802 Installation Guide

72

Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide

Use the console port (9-pin, “D” type connector) for connecting a terminal and carrying out local 
management.

The Summit 300-48 switch uses a combination of 10BASE-T/100BASE-TX ports using RJ-45 connectors 
and Small Form Factor Pluggable (SFP) Gigabit Interface Connectors (GBICs), also known as 
mini-GBICs.

OUT

Solid Green

The output voltages are enabled and within specification.

Off

There is a fault on at least one output voltage or voltages are out 
of specification.

TEMP

Solid Amber

The fan failed or there is an over temperature condition.

Off

The fan is operating normally and operating temperature is within 
limit.

IN

Solid Green

The input voltage is within specification and the input section is 
working.

Off

The input voltage is out of range or there is a fault in the input 
section.

Green, solid

Link is present and port is enabled; non-powered device.

Green, fast blinking

Port is enabled; link is up, device non-powered and activity on the 
port.

Amber, solid

Link is present and port is enabled; device powered.

Amber, slow blinking

Link is down or port is disabled; device powered.

Amber, fast blinking

Port is enabled; link is up, device powered and activity on the 
port.

Alternating amber/green

There is a power fault.

Off

The link is down or the port is disabled; non-powered device.

Green solid

Link is present; port is enabled; full-duplex operation.

Green blinking

Link is present; there is activity.

Amber blinking 

Reserved.

Off

Link is not present or the port is disabled.

Solid Green

Link is present; port is enabled; full-duplex operation.

Blinking Green

Link is present; there is activity.

Off

Link is not present; port is disabled; mini-GBIC is not installed.

Table 13: Summit 300-48 switch LED activity (continued)