Extreme 3802 Installation Guide
Summit1i Switch
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
89
Figure 37: Rear view of the Summit1i switch
The Summit1i rear panel includes two AC power sockets, a system label, a reset button, and the console
port.
port.
LEDs
Both Summit1i models have the following LEDs:
•
Unit status
•
Management
•
Port status
•
Port speed
GBIC Ports
Both Summit1i switch models provide two unpopulated GBIC ports with SC connectors. You can use
the following GBICs in the Summit1i switch:
the following GBICs in the Summit1i switch:
•
1000BASE-SX
•
1000BASE-LX
•
1000BASE-LX70
•
ZX GBIC
•
LX100
•
UTP GBIC
For more information about the supported GBIC types, see “GBIC Type and Hardware/Software
Support” on page 23. For specifications of individual GBIC models, see “GBIC Specifications” on
page 340.
Support” on page 23. For specifications of individual GBIC models, see “GBIC Specifications” on
page 340.
Power Sockets
The Summit1i switch has built-in dual redundant power supplies. Each power supply has its own
power socket. When the second power supply is connected to a second independent power source, both
provide a redundant, load-shared power source to the Summit1i switch. If one of the power sources or
power supplies fails, the second power supply provides all power needs, ensuring uninterrupted
network operation.
power socket. When the second power supply is connected to a second independent power source, both
provide a redundant, load-shared power source to the Summit1i switch. If one of the power sources or
power supplies fails, the second power supply provides all power needs, ensuring uninterrupted
network operation.
SHG_Rr1
AC Connectors
Console port
Reset button
Label