Extreme 3804 User Guide

2-4

S

UMMIT

 S

WITCH

 I

NSTALLATION

 

AND

 U

SER

 G

UIDE

I

NSTALLATION

 

AND

 S

ETUP

Repeat the three previous steps for the other side of the switch.

Insert the switch into the 19-inch rack and secure with suitable screws (not 
provided). Ensure that ventilation holes are not obstructed.

Connect the Summit to the redundant power supply (if applicable).

Connect cables.

The Summit is supplied with four self-adhesive rubber pads. Apply the pads to the 
underside of the device by sticking a pad in the marked area at each corner of the 
switch.

Up to four Summit switches can be placed on top of one another.

This section relates only to physically placing the devices on top of one another. 

Apply the pads to the underside of the device by sticking a pad at each corner of the 
switch. Place the devices on top of one another, ensuring that the corners align.

C

ONNECTING

 E

QUIPMENT

 

TO

 

THE

 C

ONSOLE

 P

ORT

Connection to the console port is used for direct local management. The switch console 
port settings are set as follows:

 — 9600

 — 8

 — 1

 — None

 — XON/XOFF

The terminal connected to the console port on the switch must be configured with the 
same settings. This procedure will be described in the documentation supplied with the 
terminal.

Summit.bk : 2INSTALL.FM  Page 4  Thursday, June 18, 1998  9:27 AM