Extreme 3804 User Guide

3-16

S

UMMIT

 S

WITCH

 I

NSTALLATION

 

AND

 U

SER

 G

UIDE

A

CCESSING

 T

HE

 S

WITCH

IP H

OST

 C

ONFIGURATION

 C

OMMANDS

 describes the commands that are used to configure IP settings on the switch.

Table 3-5: IP Host Configuration Commands

config iparp add <ipaddress> <mac_address>

Adds a permanent entry to the ARP table. 
Specify the IP address and MAC address 
of the entry.

config iparp delete <ipaddress>

Deletes an entry from the ARP table. 
Specify the IP address of the entry.

clear iparp [<ipaddress> | vlan <name> | all]

Removes dynamic entries in the IP ARP 
table. Permanent IP ARP entries are not 
affected.

config iproute add <ipaddress> <mask> <gateway> 
{<metric>}

Adds a static address to the routing table. 
Use a value of 255.255.255.255 for 

mask

 

to indicate a host entry

config iproute delete <ipaddress> <mask> 
<gateway>

Deletes a static address from the routing 
table.

config iproute add default <gateway> {<metric>}

Adds a default gateway to the routing 
table. A default gateway must be located 
on a configured IP interface. If no metric is 
specified, the default metric of 1 is used.

config iproute delete default <gateway>

Deletes a default gateway from the 
routing table.

show ipconfig {vlan <name> | all}

Displays configuration information for one 
or more VLANs.

show ipstats {vlan [<name> | all]}

Displays IP statistics for the CPU of the 
switch.

show iparp {<ipaddress | vlan <name> | all | 
permanent}

Displays the IP ARP table. You can filter 
the display by IP address, VLAN, or 
permanent entries.

Summit.bk : 3MGMT.FM  Page 16  Thursday, June 18, 1998  9:27 AM