Daewoo dwr-we33ws User Guide

24

Following are additional instructions regarding electrical connections and requirements for gas dryers.

To help prevent fire, electric shock, serious injury or death, the wiring and grounding must conform to the
latest edition of the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1,
and all applicable local regulations. Please contact a qualified electrician to check your home’s wiring and
fuses to ensure that your home has adequate electrical power to operate the dryer.

a) Please note that the wiring diagram is provided inside the dryer control hood. Label all wires prior to disconnection

when servicing the dryer, because wiring errors can cause serious injury to you and your dryer.

b) Your dryer is designed to be used on a separate branch, polarized, three-wire, effectively grounded, 120 Volt, 60

Hertz, AC (alternating current) circuit protected by a 15 Ampere fuse, equivalent fuse or circuit breaker.

c) Use separately fused circuits for washers and dryers, and DO NOT operate a washer and a dryer on the same

circuit.

a) The dryer has a three-prong plug to help guard against shock. The plug should be plugged directed into a properly

grounded three-prong receptacle that is rated 120 Volts AC (alternating current) 15 Amps. This plug, in order to be
properly and fully effective, must be plugged into a properly installed outlet that is grounded in accordance with all
local codes and ordinances.

b) The dryer must be grounded in order to reduce the risk of electric shock, including a malfunction or breakdown.
c) If your laundry room does not meet the specifications required by this manual, or if you are uncertain whether or not

your  laundry room meets these specifications, please have a qualified service person or company.
Review your laundry room’s electrical supply for any problems.

1

L1

2

Ground

3

Neutral Side

4

Round Grounding Prong

5

Neutral

Do not overload the circuit by operating other appliances on the same circuit when this appliance is
operating, by using an extension cord to connect the dryer to the power source, or by using any adapter to
allow additional cords to connect to the same outlet.

DO NOT modify the plug provided with the dryer. If it does not fit the outlet in your laundry room, a proper
outlet will need to be installed in your laundry room by a qualified service person or company.