Daewoo dwr-we33ws User Guide

7

The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the preparation and use of
your dryer, and it is important that you review this entire manual before proceeding with any installation or use. 
More detailed instructions concerning electrical connections, gas connections, and exhaust requirements are
provided in other parts of this manual.

Choose a location with a solid floor for your dryer.
Place the dryer in the desired location and make sure that it has the required clearances shown below.

NOTE: 
• Most installations require a minimum 5

1/2(5.5)inches(14cm) clearance behind
the dryer for the exhaust vent with elbow.

• Leveling legs should be secured.
• All four legs should be stably placed on a

solid and even floor.

• If dryer is not level, laundry may not

tumble properly and sensor will not detect
humidity information accurately.

• When leveling, please be cautious not to

injure your fingers and toes.

• If you install the dryer on the optional

pedestal, it is necessary to level with the
pedestal leveling legs.

40.1"

(102.1cm)

27"

(68.6cm)

44.3"

(112.5cm)

32.4"

(82.3cm)

• Clothes dryer installation must be performed by a qualified installer.
• Install the clothes dryer according to the manufacturer’s instructions and local codes.
• Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it

must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.
Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct
clothes dryer airflow and increase the risk of fire.

• To reduce the risk of severe injury or death, follow all installation instructions.
• Save these instructions.