Randell 44250dima Specification Guide

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, unifiedbrands.net

Information contained in this document is known to be current and accurate at the time 

of printing/creation.  Unified Brands recommends referencing our product line websites, 

unifiedbrands.net, for the most updated product information and specifications.

 Full View Drop-In 

models 44000DIA

model 44250DIMA shown

Self-contained  refrigerated  drop-in  display  unit  with  insulated 
self-closing doors in upper display structure. Display area with 
stainless  steel  interior,  (2)  angled  display  mirrors,  (4)  display 
shelves  and  side  mounted  illumination.  R-134a  forced  air 
refrigeration  system  with  expansion  valve  and  thermostatic 
control. R-134a refrigerant is “CFC free”. Foamed in place, “CFC 
free” insulation and cordset for 115V operation. Available as a 
Pass-Thru unit, See-Thru unit, or Single service unit.

CABINET  EXTERIOR:    Upper  display  structure  to  have  stainless 
steel exterior and interior sides. Self-closing, thermalpane glass 
doors  that  are  easily  removable  for  cleaning,  riding  in  nylon 
track. Louver panel to be die-stamped stainless steel (for field 
installation in counter). Unit totally prewired to junction box. 

CABINET INTERIOR: Stainless steel interior sides, and bottom with 
(4) powder coated wire shelves provided, and (2) angled display 
mirrors. Illumination to be provided by (2) fluorescent fixtures, (1) 
per side, removable without the need for tools. Bottom of display 
area to be stainless steel. Upper structure with high density, CFC 
free, urethane expanding foam. 

DOORS:  (2)  removable,  insulated  sliding  glass  doors  are 
self-closing  on  ball  bearings  riding  in  nylon  track  for  smooth 
operation.  Rubber  wiper  between  doors  to  minimize  air  loss, 
and vinyl frame to reduce condensation. Door locking system is 
standard. Doors are easily removed for cleaning. 

REFRIGERATION: R-134a refrigeration system to include condensing 
unit installed with high capacity evaporator blower coil, blower coil 
fitted with expansion valve for fast recovery and thermostatic control for 
operator adjustability. Condensing unit mounted on corrosion resistant 
framework,  suspended  below  unit  body.  Condensate  evaporator  to 
be installed in compressor airflow. Units totally prewired and to be 
supplied with 8' cordset (NEMA 5-15P) for 115V operation. 

PASS THRU MODELS:  (Dual service) same as above except to 
have (2) sets of self-closing doors, (4) fluorescent fixtures, and 
no angled display mirrors or mirrored back.

SEE-THRU MODELS: Same as above except to have solid glass 
back, (4) fluorescent fixtures and no angled display mirrors.

• Self-contained refrigeration system that utilizes R-134a
   refrigerant - “CFC free”.
• Expansion valve for fast recovery, and thermostatic control for 
   operator adjustability
• Display area illuminated from sides for shadow-free display
• Fluorescent illumination
• Foamed in place “CFC free” urethane insulation
• Adjustable shelving
• (2) sets of insulated glass display doors are self-closing riding 
   in nylon track, with door locks
• Totally self-contained for plug-in installation
• Remote units are available (consult factory)
• Condensing unit mounted on corrosion resistant framework 
   suspended below unit body

model

:  single service 

44250DIMA 

44262DIMA 

444274DIMA      

 

pass-thru 

44250DIPA 

44262DIPA 

444274DIPA             

 

see-thru 

44250DISA 

44262DISA 

444274DISA 

Revised 05/07