Randell 2235 Specification Guide

Page of 2
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Information contained in this document is known to be current and accurate at the time 
of printing/creation.  Unified Brands recommends referencing our product line websites, 
unifiedbrands.net, for the most updated product information and specifications.
Upright Roll-In Single Door Freezer 
model 2235
Specifications:
CABINET  EXTERIOR:  Cabinet  body  is  constructed  of  all  metal, 
inside & out. The top, bottom, & back are galvanized steel. Front 
and sides are available in finishes as listed above. Door and louver 
are stainless steel and are removable without tools. Provided with 
stainless steel removable ramp.
CABINET INTERIOR: Interior of cabinet is fully coved to meet N.S.F. 
standard #7. Solid core stainless steel interior floor is standard. 
The interior walls, ceiling and door liner are available in either 
stainless steel or anodized aluminum as listed above. Foamed in 
place, CFC free urethane insulation. Snap-in A.B.S. breaker strips 
allow access to condensate heater wires. Provided with stainless 
steel rack guide.
DOORS: Stainless steel front with either anodized aluminum or 
stainless steel liner, mounted on (3) heavy duty cam lift hinges 
with heavy duty chrome handle, and cylinder door lock.
REFRIGERATION: Top mounted condensing unit and evaporator coil, 
expansion valve system with pressure control, factory tested and 
balanced to maintain (0˚ F.  to -5˚ F.) average interior temperature 
utilizing CFC free 404a refrigerant. Evaporator coil is coated to 
resist corrosion. Unit supplied with master on/off switch and 8' 
cord and plug. Access to service points without tools is standard. 
Provided with full automatic coil defrost with programmable timer 
and safety switches.
Description:
Randell Series 2000 Single Section Roll-Ins are built for years of 
efficient, high performance service. The top mounted, expansion 
valve  refrigeration  system  offers  the  highest,  most  consistent 
performance available while maximizing usable interior space.
Standard Features:
• Expansion Valve
• Digital Control
• Exterior LED Temperature Display
• Top mounted Compressor & Evaporator Coil
• C.F.C. Free R-404a Refrigerant
• Efficient Hot Gas Condensate Evaporator
• Full Automatic Coil Defrost With Programmable Timer 
   and Safety Switches
• Cylinder Door Locks
• 8' Cord & Plug
• Main Power Supply Switch
• Self-Closing, Cam Lift Hinges with 120˚ Open Feature 
  (Lifetime Warranty)
• Triple Hinged Door
• Solid Core Stainless Steel Interior Bottom
• Polyurethane Insulation    
• Snap-In Magnetic Door Gaskets  
• Stainless Steel Interior Rack Guide
• Condensate Heaters Around Door  Opening
• Stainless Steel Removable Ramp
• Fully Coved Interior meeting N.S.F. Standard #7       
Standard Series
  Doors/Louver: Stainless steel. 
Exterior Sides: Anodized aluminum.
 Interior: Anodized aluminum
E Series
 
Cabinet interior, exterior sides, fronts, 
and doors stainless steel.
Finishes:
Randell Upright,  Page 17
Revised 04/06