Randell 513114po Specification Guide

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, unifiedbrands.net

Information contained in this document is known to be current and accurate at the time 

of printing/creation.  Unified Brands recommends referencing our product line websites, 

unifiedbrands.net, for the most updated product information and specifications.

RanSpec Remote Recessed Coldwall Refrigerator 

models 53000PO 

Remote  refrigerator  storage  units  with  mechanically  cooled 
pan  opening.  These  units  are  offered  in  variety  of  lengths  to 
meet your specific base storage  or pan storage requirements. 
The mechanically cooled pan opening uses Randell’s exclusive 
design  technologies,  such  as  our  Exclusive  Refrigerated  Pan 
Opening Thermostat allowing customers to make adjustments to 
the opening temperatures (independent of the base). 

model 53354PO shown with
optional finished end

CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge 

stainless  steel  with  2  1/2”  nosing.  Backsplash  to  be  coved          

cornered,  with  45˚  return  at  top  and  overall  height  of  6  3/4”. 

Ends at top fitted with recessed heavy duty steel bars for field 

bolting units together, producing a hairline seam. Exterior body to 

be corrosion resistant steel.  Door opening frames are ABS and 

contain  magnetic  strip  for  positive  seal  of  door  gaskets. Work 

surface to be at 36” work height. Legs to be 6” high stainless 

steel  with  adjustable  bullet  foot.  Legs  mounted  to  full  length 

channel  frame  assembly  which  is  integrally  welded  to  bottom 

of body assembly. Legs can be moved left to right to avoid floor 

obstacles during installation.

CABINET INTERIOR: Base interior to be ABS thermoplastic at ends 

only. Stainless steel interior liner to be coved cornered to form 

bottom, back and top. Unit insulation to be CFC free foamed in 

place urethane.

DOORS: Door fronts to be 22-gauge stainless steel exterior front 

with  16  gauge  stainless  steel  door  pulls/handles.  The  interior 

liner is vacuumed formed ABS with integral gasket retainer for 

easy cleaning and accepts Randell’s Exclusive Press Fit Gasket 

System.   Doors are mounted on concealed hinges.

REFRIGERATION:  Refrigerant  to  be  specified  by  customer 

(Specification  based  on  R-404a  refrigerant).  System  is  a 

balanced  heavy  duty  system  set-up  to  accept  hook-up  to  a 

single compressor system. The base is cooled by an independent 

blower  coiled  operating  on  its  own  expansion  valve  and 

thermostat  and  operates  through  a  dedicated  solenoid  valve. 

The pan opening is provided with its own thermostat (located in 

the compressor housing) making it easily adjustable for specific 

ambient conditions without effecting the balance of the system. 

An  on/off  switch  for  the  pan  opening  is  provided.    Optional 

electric condensate evaporator.

• Low profile 2” recess pan design provides easy reach and optimal 
   pan temperatures & reliability
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air flow-
   Randell Exclusive
• Easy maintenance Press-Fit gaskets- A Randell Exclusive
• Pan opening thermostat- A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged Removable stainless steel covers
• Foamed in place urethane insulation providing superior insulation 
   and durability
• 6” high adjustable legs, moveable left to right if needed
• Available up to 16’ under one common assembly
• Adapter bars are standard to accommodate a compliment of 
   1/6 size pans

Hinged slide-back covers
Lift-off (removable) night covers
Stainless Steel Ends    
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs 

 

Export voltages 
Over-shelving storage options
Wide pan opening

PP SPEC0135 Rev. A

Revised 07/07

model 

53333PO 

53336PO 

53339PO 

53348PO 

53351PO 

53354PO 

53357PO

 

53360PO 

53369PO 

53372PO 

53375PO 

53378PO 

53381PO 

53387PO 

 

533102PO  533114PO