Randell 66318 Specification Guide

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, unifiedbrands.net

Information contained in this document is known to be current and accurate at the time 

of printing/creation.  Unified Brands recommends referencing our product line websites, 

unifiedbrands.net, for the most updated product information and specifications.

RanSpec Remote Ice Cream Cabinet 

models 66000

Remote refrigerated ice cream storage and dipping cabinet. 16 
gauge stainless steel top, and integral backsplash with 45˚ return. 
Die-stamped openings in top with insulated lids. Stainless steel 
fronts, stainless steel interior with welded-in-place refrigeration 
lines. 6" high adjustable and movable legs. 

Shown with optional finished end.

• Refrigeration system set up for R-404a refrigerant, 
  (specify if otherwise)
• Expansion valve and refrigeration lines provided and installed 
   for field connection
• Superb low temperature unit for ice cream storage 
   and dipping
• Stainless steel interior allows double stacking of standard 
   3 gallon containers
• Foamed in place “CFC free” urethane insulation  
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚ stainless
   backsplash is optional.

CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge 
stainless  steel  with  2  5/8"  nosing.  Backsplash  to  be  coved 
cornered,  with  45˚  return  at  top  and  overall  height  of  6  3/4". 
Ends at top fitted with recessed heavy duty steel bars for field 
bolting  units  together,  producing  a  hairline  seam. Top  to  have 
die-stamped  cut-outs  with  raised  rims,  fitted  with  removable, 
hinged,  insulated  lids.  Exterior  body  to  be  corrosion  resistant 
steel.  Front  panels  to  be  removable,  constructed  of  22  gauge 
die-stamped  stainless  steel.  Louver  panel  to  be  die-stamped 
stainless steel. Work surface to be at 36" work height. Legs to be 
6" high stainless steel with adjustable bullet foot. Legs mounted 
to full length channel frame assembly which is integrally welded 
to bottom of body assembly. Legs can be moved left to right to 
avoid floor obstacles during installation.

CABINET INTERIOR: Unit interior to be stainless steel, with interior 
sides to be wrapped with refrigerating lines held firmly in place 
with holding clips welded to unit body. Unit insulation to be CFC 
free foamed in place urethane.

REFRIGERATION:  Cooling  system  to  utilize  R-404a  refrigerant, 
specify  if  otherwise.  Expansion  valve  and  refrigeration  lines 
provided  and  installed  for  connection  at  unit  rear.  Syrup  rail 
cooled  by  refrigeration  line  installed  and  attached  to  sealed 
stainless interior rail liner. Condensing unit control and solenoid 
provided. Unit totally prewired to junction box.

This equipment is intended for use in rooms having an ambient 
temperature of 86˚F (30˚C) or less.

PP SPEC0141 Rev. A

Revised 08/07

model 

66318 

66331 

66343