Randell 68331 Specification Guide

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, unifiedbrands.net

Information contained in this document is known to be current and accurate at the time 

of printing/creation.  Unified Brands recommends referencing our product line websites, 

unifiedbrands.net, for the most updated product information and specifications.

RanSpec Remote Ice Cream Cabinet 

models 68000

Remote  refrigerated  ice  cream  storage  and  dipping  cabinet. 
16  gauge  stainless  steel  top,  and  integral  backsplash  with 
45˚  return.  Die-stamped  openings  in  top  with  insulated  lids, 
refrigerated syrup rail with jars, lids, and pumps. Stainless steel 
fronts, stainless steel interior with welded-in-place refrigeration 
lines. 6" high adjustable and movable legs

29˚ deep unit shown with optional finished end.

• Refrigeration system set up for R-404a refrigerant, (specify if otherwise)
• Expansion valve and refrigeration lines provided and 
   installed for field connection
• Refrigerated syrup rail supplied with pumps, jars and lids
• Superb low temperature unit for ice cream storage and dipping
• Stainless steel interior allows double stacking of standard
   3 gallon containers
• Foamed in place “CFC free” urethane insulation. 
• 6" high legs—adjustable and movable
• 45˚ integral stainless backsplash is standard. 90˚ stainless
   backsplash is optional.

CABINET  EXTERIOR:  Top  to  be  one  piece  of  die-formed  16 
gauge stainless steel with 2 5/8" nosing. Ends at top fitted with 
recessed  heavy  duty  steel  bars  for  field  bolting  units  together, 
producing  a  hairline  seam.  Top  to  have  die-stamped  cut-outs 
with  raised  rims,  fitted  with  removable,  hinged,  insulated  lids.    
6" high insulated syrup rail furnished with syrup pumps, lids with 
ladles,  and  plastic  jars.  Exterior  body  to  be  corrosion  resistant 
steel.  Front  panels  to  be  removable,  constructed  of  22  gauge 
die-stamped  stainless  steel.  Work  surface  to  be  at  36"  work 
height. Legs to be 6" high stainless steel with adjustable bullet 
foot. Legs mounted to full length channel frame assembly which 
is  integrally  welded  to  bottom  of  body  assembly.  Legs  can  be 
moved left to right to avoid floor obstacles during installation.

CABINET INTERIOR: Unit interior to be stainless steel, with interior 
sides to be wrapped with refrigerating lines held firmly in place 
with holding clips welded to unit body. Unit insulation to be CFC 
free foamed in place urethane.

REFRIGERATION:    Cooling  system  to  utilize  R-404a  refrigerant, 
specify  if  otherwise.  Expansion  valve  and  refrigeration  lines 
provided  and  installed  for  connection  at  unit  rear.  Syrup  rail 
cooled  by  refrigeration  lines  installed  and  attached  to  sealed 
stainless interior rail liner. Condensing unit control and solenoid 
provided. Unit totally prewired to junction box.

This equipment is intended for use in rooms having an ambient 
temperature of 86˚F (30˚C) or less.

PP SPEC0143 Rev. A

Revised 08/07

model 

68331 

68343