Randell 8260n Specification Guide
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Preparation Table Side Mount Saladtop
models 9200-32-7
Description:
Randell mullion blower coil, with thermostatic control, cools pans
and/or base, and allows for use of full depth interiors. R-134a
expansion valve refrigeration system in refrigerators are CFC free.
Units with durable shelf supports molded into sides, lift-off louver,
condensate evaporator, “CFC free” foamed in place insulation
and 6” high adjustable legs. Cordset for 115V operation.
and/or base, and allows for use of full depth interiors. R-134a
expansion valve refrigeration system in refrigerators are CFC free.
Units with durable shelf supports molded into sides, lift-off louver,
condensate evaporator, “CFC free” foamed in place insulation
and 6” high adjustable legs. Cordset for 115V operation.
model
9210-32-7 9200-32-7
9230-32-7 9220-32-7
model 9200-32-7
shown
shown
Specifications:
CABINET EXTERIOR: Cabinet body is constructed of all metal. The
top, front, sides and louver panel are stainless steel. Bottom &
back of unit are corrosion resistant steel. Saladtop refrigerator to
have top cutout with sanitary raised rim and recessed adaptor.
Hinged, stainless steel roll-cover. Full length, NSF composition
12” cutting board provided.
top, front, sides and louver panel are stainless steel. Bottom &
back of unit are corrosion resistant steel. Saladtop refrigerator to
have top cutout with sanitary raised rim and recessed adaptor.
Hinged, stainless steel roll-cover. Full length, NSF composition
12” cutting board provided.
CABINET INTERIOR: Interior of cabinet is fully coved to meet
N.S.F. standard #7. The Interior bottom, back, and top are
anodized aluminum with coved corners for easy clean-up. The
interior ends are ABS. Shelf supports molded into sides. Unit
insulated with a minimum of 2.5” of CFC free, foamed in place
polyurethane.
N.S.F. standard #7. The Interior bottom, back, and top are
anodized aluminum with coved corners for easy clean-up. The
interior ends are ABS. Shelf supports molded into sides. Unit
insulated with a minimum of 2.5” of CFC free, foamed in place
polyurethane.
DOORS: Stainless steel front with easy to grasp recessed handles,
mounted on heavy duty concealed hinges. Hinges are all stainless
steel with bronze pivot pin in nylon bushing. Doors with foamed
in place insulation, press fit magnetic gaskets - (designed for
installation & removal without tools), and deep draw ABS interior
liner for maximum insulation value.
mounted on heavy duty concealed hinges. Hinges are all stainless
steel with bronze pivot pin in nylon bushing. Doors with foamed
in place insulation, press fit magnetic gaskets - (designed for
installation & removal without tools), and deep draw ABS interior
liner for maximum insulation value.
REFRIGERATION: Refrigerators utilize a CFC free, R-134a
Expansion Valve refrigeration system that includes condensing
unit, and thermostatic control for operator adjustability.
Compressor housing to allow maximum airflow and permit
mounting of standard hot gas condensate evaporator. Mullion
coil, is coated to resist corrosion, and offers maximum air flow.
Expansion Valve refrigeration system that includes condensing
unit, and thermostatic control for operator adjustability.
Compressor housing to allow maximum airflow and permit
mounting of standard hot gas condensate evaporator. Mullion
coil, is coated to resist corrosion, and offers maximum air flow.
This equipment is intended for use in rooms having an ambient
temperature of 86˚F (30˚C) or less.
temperature of 86˚F (30˚C) or less.
Standard Features:
• Side mounted compressor with mullion “Turbo” coil
provides proper pan cooling, and “full depth” usable
interior space
• R-134a refrigerant in refrigerators and R-404a in
freezers both are “CFC free”
• Exterior stainless steel top & front
• Foamed in place “CFC free” urethane insulation
• Self-closing doors with exclusive press-fit magnetic
gaskets
• Shelf supports molded into sides
• Expansion valve
• Condensate evaporator
• Cord and plug for 115 volt operation
• 6” high adjustable legs
• Full length NSF approved 12” wide composition cutting
board
• Stainless steel roll cover
provides proper pan cooling, and “full depth” usable
interior space
• R-134a refrigerant in refrigerators and R-404a in
freezers both are “CFC free”
• Exterior stainless steel top & front
• Foamed in place “CFC free” urethane insulation
• Self-closing doors with exclusive press-fit magnetic
gaskets
• Shelf supports molded into sides
• Expansion valve
• Condensate evaporator
• Cord and plug for 115 volt operation
• 6” high adjustable legs
• Full length NSF approved 12” wide composition cutting
board
• Stainless steel roll cover
Stainless steel back panel
Refrigerated drawers
Tray racks for 24” or 27” openings only
Overshelves
Casters
Export voltages available
Refrigerated drawers
Tray racks for 24” or 27” openings only
Overshelves
Casters
Export voltages available
Randell Preparation Table, Page 3
Revised 07/06
Options & Accessories: