Intermec 5055 User Guide
Introduction
SECTION 1
1-4 5055 Data Collection PC User’s Guide
The Computer
The illustrations in this section will familiarize you with
external features of the Intermec 5055 Data Collection PC.
Figure 1-5 shows the AC Power Supply used with fixed-
mount units, while Figure 1-6 shows the DC-DC Power
Converter used in mobile mount installations.
All connectors that are part of the computer system are de-
All connectors that are part of the computer system are de-
scribed in detail in Section 4 of this manual.
The list below is presented here so that you will notice
The list below is presented here so that you will notice
these items as they are shown in the following pages. This
list is repeated in Section 2 because many of the problems
you are likely to encounter may result from overlooking one
or more of these items.
Each work day make sure that:
Each work day make sure that:
"
Mounting knobs are tight.
"
The DC power input cable is secure.
"
The DC power output cable is secure.
"
The AC power supply (fixed-mount) is plugged into the
wall.
"
The On/Off switch is ON (press the 1 side of the switch
to enable power).
"
The antenna connector(s) (if so equipped) is secure.
"
The LAN connector (if so equipped) is secure.
"
The scanner cable (if so equipped) is secure.
"
LPT1, the printer cable (if so equipped) is secure.