Intermec 5055 User Guide

System Setup

SECTION 3

3-2 5055 Data Collection PC User’s Guide

System Configuration Utility

A PS/2-compatible keyboard is required to configure the In-

termec Technologies System Configuration Utility (SCU).

Turn off the 5055 PC before attaching the keyboard, if one

is not attached already.
Reboot the 5055 PC. Be ready to press the <Ctrl>, <Alt>,

and [S] keys when the following prompt appears just after

the system memory tests:

<CTRL-ALT-S> to enter the System Configuration Utility

When you see this prompt, you have 2.5 seconds to press all

three keys at the same time to enter the SCU, otherwise

the computer proceeds to boot up.

" NOTE:

Any changes made to the SCU are not effective until they are saved

and the 5055 PC is rebooted. Press <Alt>, [X], [S], then <Enter> to

save the changes.

Press <Esc> to exit any window without changes. Press

<Esc> repeatedly to activate the Escape Key Pressed win-

dow, then press OK to save the current setup parameters to

the CMOS RAM and reboot the 5055 PC.

Disks

This setup option designates the startup device (“drive”) for

the 5055 PC. Press <Alt>, [D] for the Disks menu which

contains options to enable the Virus Alert, determine from

which drive to boot the computer (Removable is C), and dic-

tate which drives are enabled (IDE Settings).

Virus Alert

Press <Alt>, [D], [V] to add or remove a check mark from

the Virus Alert option. If checked, this enables a warning

if Sector 0 of the bootable disk has been changed. The de-

fault is to enable the warning.