Intermec 5055 Reference Guide

Nugg 

C

39

Receives a file from the host computer through the serial port and saves it on the 5055.
On the host, you need to transmit the file using a serial communications package that
supports the XMODEM-1K protocol (i.e., Windows 3.1 Terminal or Win95
Hyperterminal).

.%K1,

drive:filename

where:

.%K

is the command to receive a file from a host using 

XMODEM-1K

protocol.

1

indicates the 5055’s serial port.

indicates the drive on the 5055 where you want to receive and store

the file. You must include the colon (:) after the drive letter.

is the file you want to receive and save on the 5055.

1. Scan this bar code label:

Enter Accumulate Mode / Receive File

*/K/O./EK1/L*

*+/.%K1,*

2. Scan the bar code label(s) for the file you want to receive. You can scan labels from

the “Full ASCII Table” in Appendix C. The label must use this format:

drive:filename

3. Scan this bar code label to exit Accumulate mode and receive the file.

Exit Accumulate Mode

*-/*

*-/*

You can create your own bar code labels to receive files by creating a bar code in this
command format:

.%K1,

drive:filename

To receive the file 

SHIPPING.EXE

 on the 5055’s drive C, use this command:

.%K1,c:shipping.exe