Intermec 6200 Reference Guide

R

Note that the following paragraphs apply to the standard configuration for the

6200 or 6300 Series computer; but keep in mind that both of these computers

can be configured to meet your specific needs.  For example, additional RAM can

be obtained to bring the total RAM up to the maximum capability.
The following constitutes the configuration items needed for a minimum

development, except for items 4 and 5, which are only useful if you do not have a

docking station.

1. A 6200 or 6300 Series computer, with the minimum number of megabytes

of system RAM (as specified in the Introduction to the 6200 and 6300 Series

Computers paragraph).

2. DOS or Windows toolkit.
3. Main and backup batteries; at least one of each.
4. One 2 MB or 4 MB SRAM card.  You need at least one 2 MB SRAM card,

which is useful when you need to update the flash software.  For larger

storage, SanDisk flash memory cards are available.

5. PC Card reader/writer (for example, Databook card readerĆwriter or

notebook computer that can read/write PC Cards).

6. NULL modem cable for connecting the PEN*KEY dock to a PC.
7. Cable for connecting the PEN*KEY dock to a serial printer, or to a 4800

Series or 6800 Series Printer (if printing is required).

8. Single dock with wall charger.

The configuration files, CONFIG.SYS and AUTOEXEC.BAT (for 6300 Computer)

and the CONFIG.SYS and ROMINIT.BAT (for the 6200 Computer), are required

for an appropriate environment for the 6200 and 6300 Series computers.
For examples of configuration files for these computers, see Appendix A, Sample

Configuration Files.

"