Intermec 6200 Reference Guide

R

The only difference between the Pen Calibration program (62CALIB.EXE) for

the 6200 Computer and the Pen Calibration program (CALIB.EXE) for the 6300

Computer, is the screen size it is designed to operate within.
When running the calibration program, you are requires to touch each of the four

crosshairs three times on the screen as they appear.  Then press YES to save the

settings.

"

There are two command line switches:

Switch

Description

ćv

This displays the current calibration values.

ć?

This displays the help screen.

The program SCANTSR.EXE collects and passes scanned data to an application

via the standard DOS typeĆahead buffer, where the scanned bar code is available

to an application as simple keystrokes.  The program also manages power for the

scan operations.
SCANTSR is installed from the AUTOEXEC.BAT file via this statement:

scantsr [/option:value] ...

Install this program after the CardSoft drivers and TSRs are installed (if they

are used) and after NORAPM.EXE is installed.

"

SCANTSR is activated by an application generating an interrupt on 0x7A with

the processor register AH set equal to 0x80.  This results in one scan decode

event, where the scanned data becomes available to the application as if the user

had typed the bar code.  If for any reason a symbology is not scannable, the user

may use the keyboard to key in the data.  However, upon detecting a key press,

SCANTSR disengages itself to prevent the corruption of the data being keyed in

by the user; the program must then be reactivated to collect another scan.